1. the structure is simple, low power transmission link, simple installation and convenient;
2. the unique rectangular lever, steel is good, becomes invisible;
3. using a rubber trunnion bearing, anti-corrosion, moisture-proof, anti-vibration;
4. resistance to lateral forces, anti horizontal component, effectively reducing the belt deviation and blanking partial load on the system accuracy;
5. two load cells by partial load is small, smooth, high precision;
6. 17A weighing wide area, four sets of rollers so that the impact on the belt weighing a minimum;
7. 17B double roller, weighing shorter zone for feeding short distance belt conveyor.
Belt Weigh Meter
Belt Weigh Meter（ICS）
Belt scales and electronic belt scale, mainly to do metering process or as a stand-alone ingredient used in the system. Electronic belt consists of four parts: weighing bridge, weighing sensor, speed sensor and roller speed digitizer or import weighing control instrument and auxiliary equipment and other components.
Weighing bridge is attached to the conveyor frame when the material passes a voltage signal detected by the measurement Tropsch material weight on the belt through the leverage on the load cell to generate a current proportional to the belt load rollers. Speed sensor directly connected to the large-diameter roller speed to provide a series of pulses, each pulse represents the frequency of a movement of the belt unit, the pulse is proportional to the belt speed. Weighing received from the load cell and speed sensor signals arrive at a value of instantaneous flow and cumulative weight value by integrating operations, and were displayed.
Weighing bridge is attached to the conveyor frame when the material passes a voltage signal detected by the measurement Tropsch material weight on the belt through the leverage on the load cell to generate a current proportional to the belt load rollers. Speed sensor directly connected to the large-diameter roller speed to provide a series of pulses, each pulse represents the frequency of a movement of the belt unit, the pulse is proportional to the belt speed. Weighing received from the load cell and speed sensor signals arrive at a value of instantaneous flow and cumulative weight value by integrating operations, and were displayed.
| modle | 17A | 17B | ||
| Weighing range | 0.5-6000 t/h | 0.5 – 4000 t/h | ||
| Belt Width | 500-2200 mm | 400 – 2200 mm | ||
| Belt speed | 0.05- 4 m/s | 0.05 – 4 m/s | ||
| Weighing area length standard | 4800 mm | 2400 mm | ||
| Conveyor belt angle | ≤18 ° | ≤18 ° | ||
| Measurement accuracy | (+ -)0.25% | (+ -)0.25% | ||
| bandwidth | A | B | C | |||
| Conveyor Type | DT75 DTⅡ | DT75 DTⅡ | DT75 DTⅡ | |||
| 500 | 488 508 | 720 740 | 770 790 | |||
| 650 | 638 658 | 870 890 | 920 940 | |||
| 800 | 838 858 | 1070 1090 | 1120 1140 | |||
| 1000 | 1068 1058 | 1300 1290 | 1350 1340 | |||
| 1200 | 1318 1308 | 1550 1540 | 1600 1590 | |||
| 1400 | 1518 1508 | 1750 1740 | 1800 1790 | |||
| 1600 | 1758 —– | 1990 —– | 2050 —– | |||
Optional accessories
